Horizon Elephant Reprap 3D printer control MKS PT100 thermocouple temperature PT100 sensor amplifier board interface board ramps
Warning: Last items in stock!
Tags: reprap 3d, mks 3d printer controller, mks 3d printer, Cheap reprap 3d, High Quality mks 3d printer controller, China mks 3d printer Suppliers.
Product Name: 3D printer MKS PT100 thermocouple amplifier interface board
1, each one will do functional testing.
2, especially with a 3Pin 70cm connection for easy connection to the ramps1.4 use.
1, a customer base of professional research and development products.
2, due to low production, small welding difficulty, welded by hand.
Suitable for: make ramps1.4 or other motherboard PT100 thermocouple.
Shipping list: Dashboard module * 1, 3Pin signal line individually wrapped anti-static bag
On Ramp1.4 use:
1, modify the firmware of Configuration.h Marlin modify temperature configurations:
#define TEMP_SENSOR_0 20
2, Marlin modify the firmware of pins.h, find ramps1.4 board Pin port configuration section, modify
#define TEMP_0_PIN 2
For MKS Gen or ramps1.4, amended as follows:
#define TEMP_0_PIN 3
// Can not use the original thermistor pin port, can only choose another pin port, it recommended to choose A3 (D57), because there is just next to 5V and GND pins, for easy connection.
For MKS Base V1.3, revised as follows:
#define TEMP_0_PIN 11
3, the thermocouple is connected to the MKS PT100 control panel, the signal cable into the adapter plate.
4, the signal line connection method:
MKS Gen ramps1.4 connection or the signal cable to the Aux-1, the red line corresponds to 5V, black corresponds to GND, green or blue signal line corresponds to the D57 (A3)
A11 connecting MKS BaseV1.3 limit switches can be connect
Cheap reprap 3d, Buy Quality mks 3d printer controller directly from China mks 3d printer Suppliers: Horizon Elephant Reprap 3D printer control MKS PT100 thermocouple temperature PT100 sensor amplifier board interface board ramps
No customer comments for the moment.